» Home » Products » insulated piercing connector » NTD series insulation piercing clamp

NTD series insulation piercing clamp

online service

Tel:+86-577-62899172

Item No.

Main wire section

Branch wire section

Bolt

NTD50-35F

CU7-54

6-35

1

NTD50-35AF

AL7-54

6-35

1

NTD301F

CU7-95

35-95

2

NTD301AF

AL7-95

50-150

2




Advantages:

1).Designed for all weather applications and easy to install.
2).Special connecting tablet is adopted in our insulation piercing connector, which is applicable to joint of Cu(Al) and Cu(Al) or Cu and Al.
3).Its self-seam frame is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.



Instructions:

NTD series insulation piercing connector is not only used to connect the (or separate) the self-supporting insulated wire, but also used to separate lighting circuit.

1).Adjust the connector nut to suitable location.

2).Put the branch wire into the cap sheath fully.

3).Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

4).Turn the nut by hand, and fix the connector in suitable location.

5).Screw the nut with the sleeve spanner.

6).Screw the nut continually until the top part is cracked and dropped down

 




The key words of this product:

Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.