» Home » Products » insulated piercing connector » DCNL series insulation piercing clamp

DCNL series insulation piercing clamp

online service

Tel:+86-577-62899172


Modle

Conductor Range(mm2)

Bolt

 

Main(Al/Cu)(mm2)

Branch (Al/Cu)(mm2)

DCNL-1

10-95

1.5-10

1

DCNL-2

16-95

4-35

1

DCNL-3

25-120

25-95

1

DCNL-4

50-150

4-35

1

DCNL-5

35-150

35-150

1



Advantage:

1)DCNL SERIES INSULATION PIERCING CONNECTOR had passed 6KV test under water for 1 Min.

2).Designed for all weather applications and easy to install.

3).Its self-seam frame is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.



Instructions:

Purpose of Insulation piercing connectorsis to connect main and one, two tap conductor s ' of section, how is written on body. Type without letter B serves to connect isolated conductors, with letter B bare conductors.DCNL for one tap conductor is equipped with cable termination cap PCEC16/120, for two output wires-no cap.

1).Adjust the connector nut to suitable location.

2).Put the branch wire into the cap sheath fully.

3).Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

4).Turn the nut by hand, and fix the connector in suitable location.

5).Screw the nut with the sleeve spanner.

6).Screw the nut continually until the top part is cracked and dropped down.

 





The key words of this product:

Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.